How to edit economy schedules
Last updated 26 days ago
Overview
The Economy schedule in the Gecko App lets you decide when your spa holds a lower temperature. During an economy period, your spa's target temperature is reduced by 20 °F (11 °C), so the heater runs less. Each Watercare mode (like Standard, Weekender, or Away from home) has its own economy schedule that you can edit or customize.
How to access your economy schedule
Open the side menu ☰ and select Settings.
Tap Watercare to view the list of modes.
Tap the ✏️ (pen) icon next to the mode you want to edit — for example, Standard or Daily Saver.
Select the Economy tab.
You’ll now see the current economy schedule(s) for that Watercare mode.
How to edit or manage schedules
Add a new schedule
Tap ADD +.
Set your preferences:
Repeat: Choose when the schedule repeats (e.g., Everyday or Weekdays).
Start time: Select when the economy period begins.
Duration: Choose how long the economy mode stays active.
Tap SAVE to confirm your new schedule.
💡 Tip: During the scheduled economy period, the heater still runs if the water drops below the reduced target. Your spa holds that lower temperature instead of your full set temperature.
Edit an existing schedule
Tap the ✏️ (pen) icon beside the schedule you want to change.
Adjust the repeat, start time, or duration.
Tap SAVE to apply your updates.
Delete a schedule
Tap the 🗑️ (trash) icon next to the schedule you want to remove.
Confirm when prompted.
⚙️ If a mode has no economy schedule, your spa holds your full set temperature around the clock in that mode.
Common questions
Can I have multiple economy periods per day?
Yes. You can create more than one schedule.
What happens outside economy periods?
The heater will maintain the set temperature during normal operation.
Does economy turn the heater off?
No. Economy lowers the target temperature by 20 °F (11 °C). The heater can still run to hold that lower temperature.
Was this helpful?
More in Remote Control
How to change your Watercare modeUnderstanding Watercare modesHow to edit filtration schedulesHow to change temperature unitStill need help? Ask the team